This is a collection of techniques for removing minor dents from vehicles. With this system, a wide variety of damages can be repaired when there is no deterioration in the paint. One of the most common uses for  dent repair Thornhill systems is hail bump repairs, door knocks, small creases, and sometimes minor bumper repairs if accessible.

When Dent repair Thornhill Not Convenient?

Two of the factors that influence a successful repair are the flexibility of the paint and the amount of metal that has been stretched from damage. Most paint finishes allow techniques to be successful. As for metal, the stretch can vary depending on the thickness.

When is the system convenient?

With the system, repairs can be made to dents that are several centimeters in diameter, as long as the paint and metal have not been overstretched. Most experienced repair technicians can fix large or shallow dents to acceptable levels, but very large dents may not be repairable using this method. The success of a good finish also depends on the skill and experience of the repair technician.

What methods are used for dent repair?

Among the most common methods are the use of metal rods and picks to push dents from the underside of the body panel. Additionally, glue and a specially designed tab can be used from the outside of the panel to remove dents in areas inaccessible to rods and picks. In either case, fine-tuning the repair often involves “tapping” the repair to remove small high spots, or reducing the size of the metal by making the surface flat. The (Dent repair Thornhill) method can be used on aluminum and steel panels.

Experienced technicians match the high points to match the texture of the paint.

Too much pressure from an inexperienced technician could create severe high spots and the clear coat may split or crack. To do a good job you need experienced technicians who will not crack or chip the paint. The ability to successfully remove dents and dings is learned through years of experience and practice, for many it is an “art”. An untrained person can damage a dent if they try to repair it without the correct skills and knowledge.

What tools for dent repair with systems?

In the market you can find many tool kits consisting of rods, suction cups and more useful to remove blows without damaging the paint.

Likewise, there are induction equipment that, in addition to being very useful for repairing hail blows, can be used for other tasks in the mechanical workshop. An example is the Easy Dent inductors, ideal for repairing small dents. These kits can also be used to complement other techniques on deeper and more important shots. Its operation is based on heating the metal by induction in the area that has suffered a dent. When undergoing this heating, the crystalline structure of the metal is strained, recovering its initial shape.

Some of the advantages of this type of device are the following:

-No remains of consumables.


-Easy to use.

-Save time by not having to disassemble parts.